Whitewash: why it cools the house but not the street
Southern Spain's white villages are white for a physical reason: whitewash reflects most of the sunlight, so the wall absorbs less heat and the house stays cooler. But reflected light does not vanish. Some of it bounces into the street and onto anyone walking past, which is why a white, unshaded street at midday can feel harsher than the thermometer suggests.
Why does whitewash keep the house cool?
A white surface sends much of the solar radiation back instead of absorbing it. The wall heats up less, less heat gets indoors and the home needs less cooling. It is folk science that goes back centuries, and current research supports it.
Lawrence Berkeley National Laboratory (LBNL) has spent years studying "cool walls", facades with high solar reflectance. Its results for California show that:
- they cut buildings' annual energy use, with savings per square metre comparable to cool roofs, because walls usually have less insulation than roofs;
- in Los Angeles County in July, reflective walls provide nearly as much daily average air cooling (86%) as reflective roofs.
So what is the catch?
Reflected light has to go somewhere. In a narrow street, much of it ends up on the facade opposite, on the ground or on passers-by.
A study in Los Angeles (Middel et al., Environmental Research Letters, 2020) measured this with reflective pavement. The coated asphalt was up to 6 °C cooler in the afternoon, but the mean radiant temperature felt by pedestrians rose by about 4 °C, because the reflected radiation hit them directly. Air temperature barely changed: about 0.5 °C in the afternoon and 0.1 °C at night.
That study looked at the ground rather than walls, but the principle holds: a cooler surface does not always mean a cooler person.
What works better for people on foot?
Shade. The authors of the Los Angeles study conclude that, to reduce the heat people feel, planting trees or providing shade works better than reflective paving. LBNL, for its part, is researching retroreflective materials that send light back towards the sky rather than into the street.
The full answer combines both:
- whitewash or reflective paint on the wall, so the house heats up less;
- shade on the pavement, from trees, awnings or pergolas, so pedestrians avoid both direct and reflected sun.
What it means for your city
Painting walls white is cheap and helpful for buildings, but it is not enough for public space. Before approving a programme of light-coloured facades or paving, it pays to know which streets have shade at midday, which are narrow enough for reflections to concentrate, and where residents walk most.
That calls for analysing the town street by street. UrbanClimate OS is building a digital twin of urban heat, with a pilot in Torrevieja planned for 2027, that finds where heat is critical, explains why, and compares measures such as trees, shade and materials by cooling effect and cost.
Is your street white, or does it have shade?
FAQ
Why are Andalusian villages white?
Because whitewash reflects most solar radiation, so walls absorb less heat and homes stay cooler.
Can a white facade make the street feel hotter?
It can. Reflected light bounces onto pedestrians; with reflective paving in Los Angeles, the mean radiant temperature for people walking rose by about 4 °C.
Which is better: painting white or adding shade?
Combining both: whitewash on the wall for the house, and shade on the pavement for people.
Want to see the heat profile of your city?
We prepare a heat profile for each municipality: extreme-heat days, tropical nights, green cover and a land-surface temperature map.
Write to usSee the platform




